SOLID200 Series Intelligent ATS Controller

Detailed Product Description
As one key component of Automatic Transfer Switch Equipment, Solid200 Series ATS controller can provide relibiale,intelligent control for ATS where frequency is 50 or 60HZ,rated voltage up to 400AC,single pole or there poles power system.

Function:
1.Use Switch-power supply,wide range of working voltage(85Vac-400Vac).
2.Pass the EMC test ruled by IEC61000-4/GB17626 Criterion.
3.User-friendly operation mode,4 operation mode manual power on/off
on panel added.
4.1-pole/3-pole ATSE supported.
5.35mm DIN or panel installation.
6.Modbus/Profibus-DP/CAN or industrial Ethernet supported.

Normal conditions:
1.Air tenperature:≤40,and average temperature in 24-hour:≤5.
2.Altitude:<3000m.
3.When temperature is up to 40,the relative humidity does not exceed
50?,but in lower temperature,controller can endure higher humidity.
For example:when temperature is 20,humidity can high up to 90?.
4.Fixed in the place where there is no explosive or corrosive gas.
5.Fixed in the place where there is no rain and snow or heavy dust.
6.Class of pollution.

Applition:
    Use the industrial MCU as kernel,by examining power supply voltage from two incoming lines on real time,makes precise measurement on power faults,and control the ATS transfer according to pre-set delay time.